Testimonial: Nigel Hopkins 01/08/2011

Dear Kathy,

Please find enclosed the four larger blanking plates we did not use.

Thanks so much for all of your help on this job.  We did it successfully and now I have peace of mind that the swirl flaps can no longer unexpectedly fall off causing spectacularly disasterous results.

I put some feedback on your site and on BMW Land.

Thanks once again for being a great company to deal with and a personal thanks to you for all of your help.

Have agreat day

Sincerely

Nigel Hopkins

Testimonial: Stuart Morey 27/08/2011

Just a quick than you for your prompt service your company carried out on my car today, very informative and with very good knowledge, will be booking my car back in with you on my next due service date, my expectations were exceeded and feedback is what appealed to myself before I booked my car in.

Thanks again

Testimonial: Marcus Hann 21/07/2011

Dear Kathy,

Thank you again for the speedy delivery of my swirl flap blanking plates.  I actually managed to track down some instructions on one of the BMW forums for swirl flap removal on a 535d, and that made things quite a bit easier.

Funnily enough once I got my manifold off the flaps seemed all OK, nothing loose, going by how clean it was I have a feeling that the manifold may have been changed previously but I’m not sure.  Anyway, I did the delete so that’s all good.

Luckily though once I had removed the manifold  I found a broken wire, the wire went to one of the boost control valves there.  I’m not sure which one or what it’s job actually was, the car seemed to be working OK, but I repaired that whilst I was there.

If I had not done the delete I would not have found it!  So a double thank you!

I compared the seperator you sent me to the one on my car and they were the same, so I kept yours sealed up and have returned it along with the smaller blanking plates that were not required.

If you could organise the refund against the returned items I would be very grateful, and if you can tell me once it is done that would help me too.

So thanks again for all your help and guidance, I’m sure I will be in touch again.

Regards

Marcus

Testimonial: Steve Ogden 20/07/2011

Dear All at PMW,

Please find enclosed swirl flap blanking plates that are surplus as the larger ones you sent fitted.  Can I also say thanks for the advice regarding the crankcase breather.  The one fitted is the vortex type so hopefully no worries there.

Thanks again for running such a professional and courteous business, these days a rareity indeed.

Thanks again

Steve Ogden